9.16. Rephased camshaft

From 650wiki

Jump to: navigation, search

< Back to 9. Mods & Customizing


Cut, timed, reweld. Anyone need this done?

It all depends on your methods. What procedures you are using and the type of welding rod, not migging.


Web Cam (http://www.webcamshafts.com/) or Megacycle (http://www.megacyclecams.com/) will custom grind your camshaft to either 270 or 277. No cutting is done to the camshaft. The lobes are ground down and then reconstructed and ground to final profile. For a 270 rephase, the right side lobes must be advanced, or rotated forward, 45 degrees. For a 277 cam, the right side lobes must be rotated forward 41.538 degrees.

--

Personal tools